VACUUM

THE ORIGINAL.

The technology which makes it possible for the first time to adapt the shell of the ski boot completely to the anatomy of any foot. VACU-PLAST material and a special process achieve a fit which is also used successfully by top athletes in the Alpine Ski World Cup. A special Fischer High-Tech Polymer is used for the Fischer VACUUM boots. It was developed exclusively for the ski boot sector and stands out through superior material properties: thermoformable at 80°C, high temperature stability, lower weight and better vibration dampening.

VACUUM STATION

The Fischer VACUPLAST material enables for the first time a completely anatomical adjustment of the boot with a quality never reached before.

And all that in 20 minutes.

The 100% guaranteed fit you can achieve as a result was awesome for both the skiers and Fischer‘s selected retail partners.

VACUUM BOX

Based on the same technology, boots featuring this technology likewise enable the individual adjustment of the shell but the targets are different: the 16-minute fitting procedure achieves a sporty, comfortable fit which is unrivalled in this segment.

WARM-UP

Heat up the shell to 80 degrees Celsius in the oven.

PRE-FIT

Insert foot into preheated shell.
Put on Cooling Pad and Compression Pad.
Adjust the stand position on the VACUUM FULL FIT Station.

PERFECT FIT AND COOL DOWN

Adjust the entire boot to the anatomy of the foot using compressed air.
Use the Cooling Pad to cool it down.

HEATING PERIOD

Shell heating with blanket warmer technology as tried and tested in motor sport.

FORMING PROCESS

Placing of Cooling Pad and Compression Pad.

PARTIAL FITTING OF HEEL AREA

Adaptation of heel area to foot anatomy using compressed air.

Highlight Products